Gas Detection

Built around RKIs latest smart sensor technology, the SC-01 is a versatile single toxic gas monitor. The smart sensors are interchangeable, with the SC-01 automatically recognizing any sensor change without any set up or configuration changes. The sensors calibration information also stays with each sensor. Weighing only 7.6 ounces, it has many features which set it apart from the competition. For example, it offers sensors for Ammonia (NH3), Arsine (ASH3), Carbon Monoxide (CO), Chlorine (Cl2), Hydrogen Sulfide (H2S), Phosphine (PH3), and Sulfur Dioxide (SO2). The SC-01s unique extender cable allows the sensor to be attached to the end of a 10 foot cable for remote monitoring and quick response.

Features
• Smart interchangeable sensors
• Wide range of toxic gases
• Unique extender cable for remote monitoring
• Compact (2.5 x 5.2 x 1.2 in.)
• Lightweight, 7.6 ounces
• 250 hours of continuous operation
• Operates on 2 “AA” alkaline batteries
• Audible / visual / vibration alarms
• Datalogging standard
• Impact resistant protective rubber boot
• Intrinsically safe, CSA, C/US classified

Download Datasheet

Built around high-quality micro-sensor technology, the GX-2003 is RKIs smallest personal 4-in-1 gas monitor with a built in sample pump. Weighing only 11 ounces, it has many features which set the GX-2003 apart from the competition. For example, it can monitor the standard confined space gases (LEL combustibles, Oxygen content, Carbon Monoxide, and Hydrogen Sulfide), and it can also measure 100% volume Methane and dynamically display either % LEL, or % volume with its auto-ranging ability.

Download Datasheet

After 60 years of breakthroughs in gas detection and sensor technology, RKI is proud to introduce the smallest and most affordable 4-gas monitor in the world, the GX-2001. Weighing only 6 ounces and about the size of a pager (2.8" H x 2.2" W x 1.1" D), the GX-2001 simultaneously monitors combustibles, oxygen, carbon monoxide, and hydrogen sulfide. The GX-2001 is armed with standard features like autocalibration, datalogging, rechargeable Ni-MH batteries, a unique vibration alarm, STEL / TWA readings, peak hold and auto backlighting at alarm on a large LCD display, and it even tells the time. All of these controls and features are operated through 3 simple glow in the dark buttons. Utilizing either of the GX-2001's chargers, the standard charger or datalogging / charger station, it's Ni-MH batteries will fully recharge in 90 minutes. Also available is the datalogging software program which is Windows 95, 98, ME compatible.

Download Datasheet

RKI is proud to produce the most versatile portable gas detector on the market. The EAGLE is a powerful instrument that does more than offer standard confined space protection. The EAGLE also provides detection combinations never before offered in a portable gas monitor featuring the industry’s widest selection of high quality, long life and field proven sensors.

The EAGLE’s ergonomic design offers easy access to controls such as autocalibration, alarm silence, demand zero, peak hold and a wide variety of other features. Each channel has 2 alarm levels plus TWA and STEL alarms for toxic channels. Alarm levels are adjustable and can be latching or self resetting.

Download Datasheet
Download Datasheet Marine Version

The GasWatch 2 is the first single-gas monitor that can be comfortably worn on the wrist like a watch. The GasWatch 2 is a convenient, inexpensive, hands-free method of gas monitoring for personal protection of oxygen deficiency, carbon monoxide or hydrogen sulfide. The built in vibrator, audible, and visual alarms immediately alert the user of a dangerous gas conditions

Download Datasheet

Individuals need personal protection in hazardous areas at all times without adding extra bulky equipment, and the 01 Series can provide that kind of protection at an affordable price. The GP-01, OX-01, CO-01, HS-01 and HS-01S models are personal single gas monitors designed for personal protection from combustible hydrocarbons, oxygen deficiency, hydrogen sulfide, or carbon monoxide. Each model is controlled by a microprocessor for reliability and advanced capabilities. Each model can be operated continuously for at least 3,000 hours on (2) AAA size alkaline batteries except the GP-01, which operates for 16 hours. The 01 models have 2 preset alarms that are user adjustable and each version is also equipped with visual, audible, and vibration alarms as standard. The replacement sensors are inexpensive, easily field replaceable, have a life expectancy of 2 years, and are interchangeable with other RKI monitors such as the GX-2001, GX-2003, and GasWatch 2 models.

Download Datasheet

The GX-82A and GX-86A can detect a combination of Combustible, Oxygen, and toxic gases (Carbon Monoxide or Hydrogen Sulfide). The GX-82A and GX-86A are enhanced popular designs of the time tested GX-82 and GX-86. These new designs maintain all of the popular features on the original models such as
the unique removable sensor block engineered for extender cables, sample drawing attachable pump capability, and easy to replace "bayonet" style sensors. Controlled by a microprocessor, the GX-82A and GX-86A models provide continuous monitoring for 12 hours on 2 "C" size alkaline batteries, data logging, and autocalibration of all channels simultaneously. All accessories for prior models are interchangeable with the new "A" series instruments. UL classified as intrinsically safe.

Download Datasheet

The GX-94 is a powerful and economical solution for confined space gas monitoring requirements. For one low price you receive features such as single-button autocalibration of all gases, datalogging with a lunch break mode, continuous operation for 12 straight hours on only 2 size C alkaline batteries with a dual low battery alarm (warning and fully dead), simultaneous readout of all 4 gases on an auto back-lit LCD display, a high impact RFI shielded housing, user adjustable audible and visual alarm settings, additional STEL / TWA / Ceiling alarms and readouts, as well as peak or average readouts. The GX-94 is a lot of gas monitor for its price.

Download Datasheet

These highly sensitive portable gas detectors use photoelectric photometry method with colorimetric detection tab. The sample drawing rate is controlled by a microprocessor. Both the FP-30 and FP-40 have a direct readout of measurement value on an LCD display. The Model FP-30 can detect the new World Health Organization level of 0.08 ppm average for 30 minutes

Download Datasheet

The P-200 series gas detectors are rugged, lightweight, handheld portables for detecting combustible gases/vapors and monitoring atmospheric oxygen content. Engineered to serve the demanding field requirements of industrial, public works, utilities, and landfills, these instruments share many common features and offer the user distinct advantages in terms of economy, dependability, maintainability and ease of operation. Built to withstand rough field environments, all Series P-200 instruments are constructed with rugged cast aluminum housings, and incorporate highly reliable electrical design characteristics. All active and passive components are mounted on easily accessible printed circuit boards. In operation, all P-200 instruments are not only easy to use, sharing common functional characteristics, but they are extraordinarily fast in providing accurate readings. For combustible indicators, the response time is about 4 seconds, and for oxygen indicators an accurate reading is attained within 6 seconds

Download Datasheet

The Model RI-413A utilizes non-dispersive infrared absorption (NDIR) technology as a convenient and inexpensive solution to the problem of measuring for halocarbon vapors like R-11, R-12, R-22, R-113, R-114, R-502, and R-134A. By combining the versatility of a microprocessor and the selectivity of a non-dispersive infrared analyzer, RKI provides a compact and inexpensive halocarbon monitor for daily use in industrial safety and atmospheric control applications.

Download Datasheet

This model is a portable HC or CH4 detector with an Infrared (NDIR) type sensor. This sensor style provides accurate detection of HC or CH4 gas levels even in N2 and inert environment. The measuring ranges are 0-100 Volume% and 0-100% LEL, with automatic ranging. The RI-415 has explosion proof and Intrinsic safety construction so it can be used safely in any environment

Download Datasheet

This model has two versions and is a combination type portable HC/O2 or CH4/O2 gas detector with an Infrared (NDIR) type sensor and galvanic cell type sensor. These sensors provide accurate detection of HC/O2 (HC version) or CH4/O2 (CH4 version) levels even in N2 and other inert environments. The measuring ranges are 0-100%LEL/0-100 vol% for HC or CH4 and 0-25 vol% for )2 respectively with automatic ranging. The RX-415 has explosion proof and intrinsically safe construction so that it can be used safely in any environment.

Download Datasheet

Built around RKIs latest smart sensor technology, the SC-01 is a versatile single toxic gas monitor. The smart sensors are interchangeable, with the SC-01 automatically recognizing any sensor change without any set up or configuration changes. The sensors calibration information also stays with each sensor. Weighing only 7.6 ounces, it has many features which set it apart from the competition. For example, it offers sensors for Ammonia (NH3), Arsine (ASH3), Carbon Monoxide (CO), Chlorine (Cl2), Hydrogen Sulfide (H2S), Phosphine (PH3), and Sulfur Dioxide (SO2). The SC-01s unique extender cable allows the sensor to be attached to the end of a 10 foot cable for remote monitoring and quick response

The RKI Data Cal 2000 Docking and Calibration Station is a coprehensive instrument management system which provides charging, downloading, calibration, bump testing, and configuration for our Model GX-2001 and GX-2003 gas detection instruments. The system has configuration capabilities for alarm setting, datalog and calibration interval, user and location ID, and many other instrument parameters. Factory and user default settings are available for upload to instruments. The Data Cal 2000 is supplied with PC software, power and serial cords, and operating instructions. The Data Cal 2000 power requirements are 115VAC, 50/60Hz. PC or laptop to be supplied by customer.

Download Datasheet

The SM-2000 single module calibration station for the GX-2001 and GX-2003 portable gas monitors is a stand alone station that can calibrate, bump test, charge, and archive data without the need of a computer to operate. The module has 4 operating modes, which include bump test only, % volume methane bump/calibration (for the GX-2003), calibration only, and bump with automatic calibration (if the bump test fails). The SM-2000 modules are capable of storing up to 200 bump test or calibration records. To download the data each module includes a 64 MB USB flash drive. Alsoincluded is a software package to import the data from the USB drive and manage records by serial #, user ID, or station ID. Each module has user adjustable test times and tolerances to meet specific testing requirements. The charger within the module quick charges battery packs within 90 minutes and will recognize alkaline batteries. The Calibration Station power requirements are 115/230 VAC, 50/60Hz

Download Datasheet